Titanium plating anode basket with PP anode cathode bags for electroplating
Titanium anode basket for electroplating
| Item name | Titanium anode basket for electroplating |
| Material | Pure Gr1 or Gr2 titanium |
| Dimension | 750*40*35mm
760*40*105mm
200*630*40 mm
250*1150*60mm
250*700*50 mm
Or according to customer’s design |
| Mesh Hole Size | 6*3 mm, 5*4 mm, 8*4mm, 10*5mm, 12.5*4.5mm |
| Manufacturing method | Cut, Bent, Welded |
| Applications | Electroplating industry |
| Lead Time | 7-15 days |
Titanium anode baskets are among the most commercially-available titanium products nowadays. They are made by fabricating titanium meshes, tubes and sheets, and they enable electrolytes to flow smoothly and easily.
There are several different kinds of titanium anode baskets. They come in different shapes and sizes. Here are some of the most common types:
* Circular type anode basket
* Semicircular type anode basket
* Rectangular type anode basket
* Cylindrical type anode basket
* Bucket type anode basket
* Panel type anode basket
* Regular expanded mesh anode basket
* Perforated plate type anode basket
* Square type anode basket
Titanium anode baskets can be created in different titanium grades depending on what they will be used for. The titanium meshes used to make titanium anode baskets can either be fine or coarse. The basket sizes can range from two inches to 50 inches in height. They can have diameters of between a quarter of an inch to several feet. Customers can actually ask manufacturers to make these titanium anode baskets according to their preferred dimensions.
* It is lightweight but very strong and durable.
* It has high anode efficiency, with uniform anode area.
* It suffers from less voltage loss and is less likely to go through plating bath contamination.
* It has constant current distribution and good electrical conductivity.
* It is long-lasting, even if used in high-temperature and acidic applications.
Anode Mesh Bags:
| Fabric types | Cloth appearance | Density | Applicative liquid | Remarks |
| P750(polypropylene fiber) | smooth | 180-200 mesh | Acid, alkali | Poor high temperature,long run will be harden, apply for general quality requirements |
| P751(polypropylene fiber) | Have hair | 250-300 mesh | Acid, alkali | Poor high temperature,long run will be harden, apply for high quality requirements |
| Taiwan cloth(terylene) | One sidesmooth, The Other side has hair | 350-400mesh | Acid, weak alkali | Good high temperature, long run maintain soft, apply to higher quality plating requirements |
