Guangzhou Precise Heater Co., Ltd.
Our Precise Heater Way Values For 30 years, PreciseHeater’s commitment to innovation has created a steady stream of new products, a devoted and capable workforce and constant growth. We strive to
Add to Cart
PTFE Coated Immersion Heaters Are Used In Metal Finishing Tanks With Hydrofluoric Acids
FLAT Bottom
Power from 0.5 kW to 15 kW
Minimum bulk
Quick to install
Models adapted to all classic tank configurations and offers a large exchange surface in a minimum bulk.
Assembly Type A
On metallic frame coated PP, PVDF, FEP or stainless steel frame.
Standard configuration: heating cable coated Teflon® FEP and metallic frame coated PP or PVDF. For use with feet at the bottom of the tank. Available for heaters with reference beginning with P30, P40 and P90.
With options Feet & Cable-gland these models are specifically adapted to keep liquid storage tanks from freezing, all sizes with or without double wall. Installation through the inspection trap (ø 500 mm minimum).
Can be installed in a tank filled when support feet are ordered on each side of the heating part.
Can be passed through the inspection trap without interfering with the tank.
For a complete efficiency we recommend a cable-gland installed on the non heating part N - positioning hole ø 75 mm to be planned on the dome - and a FEP Teflon® coated PT100 probe mounted on heater.
Length H corresponds to the installation height of the cable-gland on the N part.
To ensure a proper positioning and avoid any mechanical damage of the cable, please allow an extra 300 mm on the H length.
The cable is rolled up according dimensions & shapes proposed and held with PVDF, PP or FEP strips which ensure the right distance between the rolls. To secure completely the heating part it is then mounted on a metallic frame coated with PVDF or PP or on a stainless steel frame.
Electric safety : the Galvatherm heater complies with protection class 1 of EN 60519-1/2. The cable is screened throughout the entire length by a copper earthing strip. The earthing must be connected to the earth. In order to provide maximum safety, a fault-current (FI) protection device (30mA) should be used.