
Add to Cart
SmartOne PTC Chips Triple Metal Over the side Heaters- Advantages of PTC Heaters Increased Safety
Precise Heater Proudly introduces the latest in innovative heating technology - the SmartOne self-limiting PTC Electric Immersion Heater. with this technology, thermal overtemperature protectors are no longer required to ensure safe operation. SmartOne Heaters are more dependable with extended service life and will not burn out in air,scale or sludge like traditional resistance Heaters.
ProductFeaturesandBenefits:
WATTS | VOLTS | Hot Zone MM/IN. | Overall MM/IN. | 304SS 316SS | Titanium | Ship Wt. Lbs./(Kg) |
3000 | 240 480 | 180(7) | 280(11) | S3SP3211 S3SP3241 | S3TP3211 S3TP3241 | 21(9.5) |
6000 | 240 480 | 330(13) | 430(17) | S3SP6217 S3SP6417 | S3TP6217 S3TP6417 | 30(13.6) |
9000 | 240 480 | 460(18) | 585(23) | S3SP9223 S3SP9423 | S3TP9223 S3TP9423 | 33(15) |
12000 | 240 480 | 610(24) | 735(29) | S3SP12229 S3SP12429 | S3TP12229 S3TP12429 | 39(17.7) |
15000 | 380 480 | 760(30) | 890(35) | S3SP15435 | S3TP15435 | 45(20.5) |
18000 | 380 480 | 890(35) | 1040(41) | S3SP18441
| S3TP18441
| 51(23) |
24000 | 380 480 | 1040(41) | 1195(47) | S3SP24447
| S3TP24447
| 65(29) |
27000 | 380 480 | 1195(47) | 1350(53) | S3SP27453
| S3TP27453
| 70(32) |
2400 | 240 480 | 180(7) | 280(11) | S3SP2.4211 S3SP2.4411 | S3TP2.4211 S3TP2.4411 | 21(9.5) |
4800 | 240 480 | 330(13) | 430(17) | S3SP4.8217 S3SP4.8417 | S3TP4.8217 S3TP4.8417 | 30(13.6) |
7200 | 380 480 | 460(18) | 585(23) | S3SP7.2423 | S3TP7.2423 | 33(15) |
9600 | 380 480 | 610(24) | 735(29) | S3SP9.6429 | S3TP9.6429 | 39(17.7) |
12000 | 380 480 | 760(30) | 890(35) | S3SP12435 | S3TP12435 | 45(20.5) |
14400 | 380 480 | 890(35) | 1040(41) | S3SP14.4441 | S3TP14.4441 | 51(23) |
16800 | 380 480 | 1040(41) | 1195(47) | S3SP16.8447 | S3SP16.8447 | 70(32) |
LONG ELEMENT LIFE:
• PTC heater element lasts longer than conventional heaters.
• Will not burn out if run in air.
• Will not burn out due to scale or sludge buildup.
SAFE DESIGN:
Heater self limits its maximum operating temperature to 250 Celsius degree. This is lower than the ignition point of most plastics.
Will not melt tanks when a 1/2' (12mm) minimum distance is maintained.
Overtemperature protection devices are not required.
Safety is built-in, not added on.
Metal-grounded construction (earth ground).
Non-floating construction.
SIZES: 2,400 watts (2.4KW) to 18,000 watts (18KW).
VOLTAGES::
Three voltage ranges available: 200-240 volt, and 380-480 volt.
Heater is available in single or three phase power.
CORROSION RESISTANT HEADS:
Vapor resistant, flame retardant polypropylene terminal enclosures each with 3-foot (.9m) flexible PVC liquid tight conduits.
OUTSTANDING PERFORMANCE:
Watt densities of 4 watts/cm2 ensure long service life.
Auto-stabilizing solid state element prevents hot spots and ensures uniform heating.
Heater derates itself in highly viscous and high temperature solutions. Consult factory for sizing assistance.
CHEMICALLY RESISTANT:
For use in most aqueous alkaline, electroplating and rinse solutions. Check our Solution Guide or with your chemical supplier for recommended sheath material. Available in:
304 stainless steel
316 stainless steel
Titanium
CERTIFICATIONS: UL and CE.
Consult factory for the following:
Longer wire and conduit lengths.
Extended cold zones.
Temperature and level controls sized to match the heater.
We recommend temperature controls and level controls for use with this immersion heater.