
Add to Cart
L-Shaped Single Tube Electric Immersion Bottom Heaters for Surface Finishing Industry
304 SS 316 SS | Titanium | |||||
WATTS | VOLTS | Hot zone MM/IN. | RISER MM/IN. | Model No. | Model No. | Ship Wt. LBS./(Kg) |
1000 | 120 240 | 330(13) | 380(15) | LSP1113 LSP1213 | LTP1113 LTP1213 | 10 (4.5) |
2000 | 120 240 480 | 430(17) | 485(19) | LSP2117 LSP2217 LSP2417 | LTP2117 LTP2217 LTP2417 | 11 (5) |
3000 | 240 480 | 560(22) | 635(25) | LSP3222 LSP3422 | LTP3222 LTP3422 | 12 (5.5) |
4000 | 240 480 | 660(26) | 635(25) | LSP4226 LSP4426 | LTP4226 LTP4426 | 13 (6) |
5000 | 240 480 | 790(31) | 940(37) | LSP5231 LSP5431 | LTP5231 LTP5431 | 14 (6.5) |
6000 | 240 480 | 915(36) | 1270(50) | LSP6236 LSP6436 | LTP6236 LTP6436 | 15 (7) |
8000 | 240 480 | 1120(44) | 1270(50) | LSP8244 LSP8444 | LTP8244 LTP8444 | 18 (8) |
9000 | 240 480 | 1270(50) | 1270(50) | LSP9250 LSP9450 | LTP9250 LTP9450 | 20 (9) |
10000 | 240 480 | 1400(55) | 1270(50) | LSP10255 LSP10455 | LTP10255 LTP10455 | 22 (10) |
12000 | 240 480 | 1625(64) | 1270(50) | LSP12264 LSP12464 | LTP12264 LTP12464 | 25 (11.5) |
Product Features and Benefits:
SUPERIOR CHEMICAL RESISTANCE: Materials available for use in most aqueous alkaline solutions, plating solutions, and rinse tanks. Check solution recommendation chart or with your chemical supplier for proper sheath material selection.
OUTSTANDING PERFORMANCE: Watt densities of 35 watts per square inch (5.4 w/cm2) ensure long service life.
EVEN HEATING: Bottom design for even heating and varying liquid levels.
CORROSION RESISTANT HEAD: Vapor tight, flame retardant polypropylene terminal enclosure with 3-foot (.9m) flexible PVC liquid tight conduit.
SAFETY FEATURES:
Grounded construction.
Thermal protector built in. Replaceable PI fuse standard for solutions up to 180°F (82°C).
Non-floating construction.
CERTIFICATIONS: UL, CSA, and CE.
SIZES: 1,000 watts to 12,000 watts.
VOLTAGES: 120, 240 or 480 volts. 208, 380, 415, 600 and other voltages available. Single phase standard, Three Phase available.
OPTIONS AVAILABLE (contact us):
Replaceable thermal protectors:
P4: for solutions from 180°F (82°C) to 230°F (110°C).
P5: for solutions from 230°F (110°C) to 300°F (150°C).
Resettable thermal protectors:
P2: for solutions up to 180°F (82°C).
P6: for solutions from 180°F (82°C) to 230°F (110°C).
P7: for solutions from 230°F (110°C) to 300°F (150°C).
Special configurations and lengths.
Longer wire and conduit lengths.
Lower watt densities for highly viscous solutions.
Temperature and level controls sized to match the heater.